Robot Health Check

Enable the robot health check capabilities to receive E-mail notifications, in case the robots are in an unproductive state such as Running (disconnected), Error and Stopped.

Turn on the E-Mail notifications from the <build folder path>\app\Modules-xxx\Vanguard\Monitor\Xml\MonitorAlerts.xml file by turning on the mode of the required alerts.

Configure the interval at which the robots need to be monitored by modifying the value of the <RepeatInterval Minutes> key.

If any of the robots are in an unproductive state, the configured IDs receive an e-mail notification.

NOTE:

Specific notifications can be turned on or off at point in time without any pre or post steps. But every time, any other configuration settings for a component is updated, start or restart the vanguard service.