Applying Patches to Multiple Robot Agent

You can apply patches to multiple robot agents at once using Update Multiple option.

NOTE:

· In Update Multiple section for both agents and robots, you can either select the agents/robots individually or you can use the select all option. Select all option allows you to select only the filtered agents/robots.

· For robot agent, check box is disabled; if its corresponding robot agent is down or if any of its robot is in running or error state.

· Ensure that robot is in stopped state before proceeding with applying or rolling back the patches.

· A warning sign appears corresponding to particular robot agent if the robot agent is down. All the actions of robot agent and its robots are disabled.

To apply patches to multiple robot agent:

1. Click the icon to view the list of components such as Agents only and Robots only.

2. From the component list, select Agents only.

The list of robot agent is displayed.

3. Select the check box, corresponding to the Robot agents for which you want to apply the patch. The (Update Multiple) icon appears next to the drop-down.

4. Click the (Update Multiple) icon to update the patch. The UPDATE MULTIPLE - ROBOT AGENT window is displayed.

5. From the available patches, select the patch which you want to apply to the Robot Agent and then, click UPDATE.

· Additionally, using the search capability you can search for the preferred patch.

6. The UPDATE MULTIPLE REQUEST STATUS - ROBOT AGENT is displayed. This status will help you to identify the Robot Agent for which the patch is not yet applied.

Following is the field level descriptions of status:

Action	Description
CreatedAt	Indicates the data and time when the status is generated.
Name	This column displays the list all the robot agent.
Status	This column displays the patch update status of robot agent, such as: REQUEST SENT: Indicates that the request is sent to a particular robot agent to apply the patch. This status message is shown in green color. ALREADY APPLIED: Indicates that the request is already applied to robot agent. This status message is shown in orange color. UNAVAILABLE: Indicates that the robot agent is not available and patch is not applied to the robot agent. This status message is shown in red color.

7. Click OK. The patch is applied to all the selected robot agent.

Once the patch is applied successfully to all the selected robot agents, messages as Machine name - RobotAgent: Patch number applied patch# <number>appears on the page.

Additionally, the status column of all the robot agent is updated as Successfully applied Patch#<number> with the date and time stamp.

Applying patches to multiple robots

You can apply patches to multiple robots at once using Update Multiple option.

NOTE:

· In update multiple section for both agents and robots, you can either select the agents/robots individually or you can use the select all option. Select all option in update multiple will only select the filtered agents/robots.

· For Robots, check box is disabled; if its corresponding robot agent is down.

· Ensure that robot is in stopped state before proceeding with applying or rolling back the patches.

To apply patches to multiple robots:

1. Click the icon to view the list of components such as Agent only and Robot only.

2. From the component list, select Robots only. The list of robot is displayed.

3. Select the check box, corresponding to the Robots for which you want to apply the patch.

The (Update Multiple) icon appears next to the drop-down.

NOTE:

· For Robots, check box is disabled; if its corresponding robot agent is down.

· Ensure that robot is in stopped state before proceeding with applying or rolling back the patches.

4. Click the (Update Multiple) icon to update the patch. The UPDATE MULTIPLE - ROBOT window is displayed.

5. From the available patches, select the patch which you want to apply to the Robots and click UPDATE.

· Additionally, using the search capability you can search for the preferred patch.

6. The UPDATE MULTIPLE REQUEST STATUS - ROBOT is displayed. This status will help you to identify the Robots for which the patch is not applied yet.

Following is the field level descriptions of status:

Action	Description
CreatedAt	Indicates the data and time when the status is generated.
Name	This column displays the list all the robots.
Status	This column displays the patch update status of robots, such as: REQUEST SENT: Indicates that the request is sent to particular robots to apply patch. This status message is shown in green color. ALREADY APPLIED:Indicates that the request is already applied to robots. This status message is shown in orange color. UNAVAILABLE: Indicates that the robots is not available and patch is not applied to robots. This status message is shown in red color.

7. Click OK. The patch will be applied to all the selected Robots.

Once the patch is applied successfully to all the selected robots, a messages as <Robot name>: Patch #<number> applied appears on the page.

Additionally, the status column of all the robot is updated as Successfully applied Patch# <number> with the date and time stamp.

Viewing last update multiple request status

The View Last Status icon appears when a request is sent using Update Multiple functionality. This icon is available on the main page of Update management corresponding to filter icon.

To view the last status report:

Click the (View Last Status) icon.

Following is a sample update multiple request status.